Porsche 718 Spyder, Руководство пользователя

Страница: 232 / 309

229
Towing and Tow-Starting
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Using flat bed
Pulling vehicle onto flat bed
Fig. 201: Pulling vehicle onto flat bed
1. Position wooden ramps at the base of the flat bed
to reduce the angle of the pull.
2. Reel in the hoist cable and check the underside of
the vehicle for any interference.
Tying down vehicle on flat bed
Fig. 202: Tying down vehicle on flat bed
1. Carefully feed towing straps through the opening
in the rear wheels.
Make sure metal parts of straps do not damage
rim.
Make sure the strap is flat over the rim bead.
Make sure brake backing plate is not damaged.
2. Secure straps to rear of flat bed.
3. Reel in hoist cable only far enough to tension tie-
down straps.
4. Carefully feed towing straps through the opening
in the
front wheels .
Make sure metal parts of straps do not damage
rim.
Make sure the strap is flat over the rim bead.
Make sure brake backing plate is not damaged.
5. Secure straps to front of flat bed.
6. Release tension on hoist cable, but do not discon-
nect.
Use hoist cable as safety cable.
Transporting the vehicle on car
trains, ferries and transport trucks
e
Tie the vehicle down only at its wheels.
e
Deactivate the passenger compartment
monitoring system and the inclination sensor.
f
Please see chapter „Switching off passenger
compartment monitoring system and inclina-
tion sensor“ on page 45.
e
Activate transport mode on Porsche Vehicle
Tracking System Plus (PVTS Plus).
f
Please see chapter „Porsche Vehicle Tracking
System Plus (PVTS Plus)“ on page 180.
21_718_GT4_Spyder_BAL_21_WKD 982 02 21 21_KW36.20-24.21_en_US.book Seite 229 Freitag, 24. Juli 2020 11:31 11