18
Using the web application
EN
Using the web application
The web application offers more extensive setting
options than the charger.
Dashboard
Fig. 1: Dashboard of the web application
Tab. 1: Displays
Charging history
Here, the charging processes of the charger are listed
chronologically. The following information is
available for every charging process:
– Time
– Charging duration
– Consumption
– Cost (if an energy manager is connected)
– Account used (if an account was selected during
active charging)
The web application offers the option of exporting
the charge history as an Excel file.
1.
Select
Export charging history
2.
Navigate to the desired storage location and save
the file.
Connections
To access the charger web application, its
information and settings, your device and the charger
must be in the home network (via WiFi or a PLC
connection). All the functions of the web application
can be used via the Internet connection of the home
network.
If there is no home network available at the place of
use, your device (PC, tablet or smartphone) can log
into the charger directly via its WiFi hotspot.
However, in this case there is no Internet connection,
and only locally installed functions are available.
A Current charging operation
Shows information on the current charging process, such
as the start time and duration of charging.
B Device status
Shows information on the device, such as:
- current charge status
- network connection used
- status of the connection to the energy manager
(if available)
- whether a software update is available
- deactivated ground monitoring
C Current charging performance
The current flow of electricity [in kilowatts] from the
charger to the load.
Characteristic: The curve shows the progress of charging
power since the start of charging, and the total energy
consumption [in kilowatts].
Select a time on the curve to view the charging point at
this time.
A
B
C
D
E
D Consumption
The total consumption of energy of the current charging
process [in kilowatt hours].
E Charge status
The colour used on the dashboard indicates the charge
status of the charger:
-red: Error message
-blue: Charging paused
-green: Vehicle is charging
-white: No vehicle connected to charger
Information
For each active charging process, the
Work
and
Private
accounts are available to select for evaluation
purposes. You can select the account in the
information on the current
Charging process
(
i
symbol in the menu bar) on the charger.
Your choice is also applied during the next charging
process, so you need to change it if required.
Information
If your device is in a home network, it can no longer
access the web application via the hotspot IP address
(192.168.0.1), but only via the automatically
assigned IP address or the host name of the charger.
Existing IP address entries:
– Web application:
Maintenance
>
Device
information
– Charger:
Settings
>
Networks
>
Network
information
Existing host name entries:
– Letter containing access data
– Web application:
Maintenance
>
Device
information
Information
If you change from hotspot mode to a WiFi network
connection or vice versa during the setup process,
you will need to log in again.
You can change to the home network with PowerLine
Communication while a hotspot connection is active
without restarting.
