Popp
POPP HUB Powered
SKU: POPE700823
Quickstart
This is a
Z-Wave Controller
for
Europe
. To run this device please connect it to your mains power supply.
1. Connect the HUB to your local network using Ethernet cable.
2. Power up the controller. After up to 2 minutes the HUB is ready to use and the white LED will breathe normal. Now you can connect your computer or
mobile device to the new WIFI Popp-xxxx (xxxx=last 4 digits of MAC address displayed on device label, WIFI-password on label, too). Attention: For
security reasons, the initial configuration is available via WIFI only. Later, you will have more options.
3. Point your browser to http://192.168.115.1:8083. If you use a mobile device, install and start the Popp HUB app (Use the QR code on page 4).
4. The welcome screen displays your unique device ID. Remember it for remote access! Define your access password for the default login name ‘admin’
and your email for password recovery, set your time zone and LAN access (otherwise you can only access using find.popp.eu and using WIFI).
5. In case there is a firmware update you will see a message screen. Please confirm and update the firmware. Make sure not to un-power the device
during the firmware update.
6. Now you can access your controller from outside your home, too, using the service find.popp.eu. Use DEVICE_ID/LOGIN (e.g. 12345/admin) and your
password.
7. Start adding Z-Wave devices and apps and have fun. To add your first Z-Wave device, go to
->Configuration ->Devices ->Z-Wave ->Add New
and
follow the instructions.
8. You can later change your device‘s time zone and allow access to the hub user interface via the Ethernet address. Please go to
->Setup ->Applications ->Active and change settings in "Time Zone and Access from WAN" app.
What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (
two-way communication
) and
every mains powered node can act as a repeater for other nodes (
meshed network
) in case the receiver is
not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be
used together with any other certified
Z-Wave device regardless of brand and origin
as long as both are suited for the same frequency range.
If a device supports
secure communication
it will communicate with other devices secure as long as this
device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level
of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to
www.z-wave.info
.
Product Description
Sensors, switches, thermostats, cameras and many devices more will make you home intelligent. But all these components need a central controller.
The second-generation POPP HUB is a slim and compact IP smart home gateway, equipped with Z-Wave wireless technology. Therewith you can control your
whole home automation network via remote switches, smartphone, desktop and tablet pc. Inside one network the POPP HUB controls up to 230 Z-Wave
components manufacturer-independently and allows management of direct connections (associations) between the devices. These associations can be used also
without a central gateway.
The latest POPP HUB hardware generation is still more flexible. Beside already installed WiFi and Z-Wave technologies the HUB can integrate further
technologies such as EnOcean via internal and external USB ports. The POPP HUB enables you to control your home centralized and flexible ? and without any
wiring effort.
The HUB works with Z-Way, the fist Z-Wave Plus certified Z-Wave controller software, which also connects devices with different technologies with each other.
The POPP HUB is focused on easy operation and reliable security architecture. Therewith it is one of the most secure smart home gateways generally. Thanks to
the integrated device database and step-by-step instructions any new smart home device can be connected quick and easy. The POPP HUB?s big advantage is
its capability to integrate all certified Z-Wave devices with all of theirs functions. Other gateways block some device functions by itself.
By using so-called apps from the continuously growing app store, you can setup a lot of automation scenes in no time. So, you can switch your sockets time
scheduled, dim lights depending on current brightness or heat up your home to your comfortable temperature by only one push of a button.
With the free POPP HUB smartphone and tablet app, you can control your home also from outside.
Detailed instructions on the gateway can be found under the following link:
Manual
Prepare for Installation / Reset
Please read the user manual before installing the product.
