8
Step 1: Preparing the Pool
Make sure the pool has adequate
circulation. The total volume of pool
water must completely circulate
through the pump and filter at least
1 to 2 times per day. This usually
requires 8 to 12 hours of circulation.
Check with your dealer for the
proper circulation time for your pool.
Water Balance Guidelines
pH:
7.2 – 7.8
Total Alkalinity:
80 – 120 ppm
Calcium Hardness:
200 – 400
Total Dissolved Solids:
<1500
Stabilizer:
20 – 80 ppm
Free Chlorine:
0.5 – 1.0 ppm
Check the pool’s filter gauge often
and periodically clean filter per
the manufacturer’s directions.
A dirty filter will slow the flow of
water which could hamper proper
circulation.
Check the Water Hardness of your fill water before
adding to the pool. If calcium content is higher than
400 ppm, find a soft water source to fill your pool
instead; otherwise water balance will be very difficult.
Check for metals in the pool such as iron or copper.
Before attempting water balance, these should
be removed. See your dealer for a metal out or
sequesterant and follow the label directions carefully.
Before beginning with any pool care program, you must
first balance your pool water. Take a water sample to
your local pool professional (or use a complete test kit)
to test for the important Water Balance Guidelines.
IMPORTANT:
Always follow printed instructions on
the balancing chemical packages. Add balancing
chemicals in small increments one at a time with
circulation running.
For best results, wait 8-12
hours
before testing again and adding any additional
balancing chemicals.
WARNING
Do not exceed maximum operating pressure of
50 psi.
Initially shock the pool with a
chlorine shock only
to
rid the water of contaminants and establish a chlorine
residual. Always follow the manufacturer’s directions
carefully. See the DANGER box below for important
guidance on shocking.
6.
DANGER
• Never add any other types of chlorine, pH adjusters,
shock treatments or algaecides through the skimmer.
These products should be added directly into the
pool if required.
• Never use fast dissolving chlorine tablets, liquid
bleach, or calcium hypochlorite in the POOL FROG
XL Pro Cyclers.
1.
2.
5.
5b.
Look at the
Total Alkalinity
reading first. Adjustments
should be made to bring the Total Alkalinity in the range of
80 – 120 ppm
prior to making any adjustments to pH even
if it throws pH off further.
5c.
After Total Alkalinity is in range, test for
pH
. It should
be between
7.2 and 7.8
. If higher or lower, add a pH
adjuster.
5d.
Then test your Water Hardness again. If lower than
200 ppm, add Calcium Increaser. Always maintain 200-400
ppm.
5e.
Lastly, test for
stabilizer
or
conditioner levels
. Add
conditioner if the level is below 20 ppm. This will prevent
chlorine burn off. If stabilizer level is above 80 ppm,
partially drain water and re-fill.
5a.
Take a water sample
from the pool and dip a
FROG Test Strip into it.
For best results in achieving water balance, follow
steps
5a through 5e
in order.
Dip
u
6.2
6.8
7.2
7.8
8.4
LOW
BAJO
VERY LOW
MUY BAJO
HIGH
ALTO
LOW
BAJO
VERY LOW
MUY BAJO
HIGH
ALTO
VERY HIGH
MUY ALTO
0
40
80
120
180
240
Total Alkalinity
(ppm)
Alcalinidad Total
(mg/L)
Hold level for
15 Seconds
NOTE: Low pH readings may result when Total Alkalinity is below 80 ppm.
Important: Keep cap on tight between uses. Store at room temperature.
www.KingTechnology.com
Patent 6,030,842 Made in USA 553101443N
Read
v
w
IDEAL
USE BY DATE ON BOTTLE
USE ANTES FECHA
SmartChlor
Out Indicator
Active Chlorine
pH
If lighter color,
check Smart
Chlor catridge
If darker
color, OK
If lighter color,
turn cartridge
setting up
1 number
If darker color,
turn cartridge
setting down
1 number
Just Dip and Read
Test Strips
From
Specially made
for use with
FROG
Mineral Systems
50
100
250
450
800
Calcium
Hardness
Hot Tub
IDEAL
IDEAL
Dip
u
6.2
6.8
7.2
7.8
8.4
LOW
BAJO
VERY LOW
MUY BAJO
HIGH
ALTO
LOW
BAJO
VERY LOW
MUY BAJO
HIGH
ALTO
VERY HIGH
MUY ALTO
0
40
80
120
180
240
Total Alkalinity
(ppm)
Alcalinidad Total
(mg/L)
Hold level for
15 Seconds
NOTE: Low pH readings may result when Total Alkalinity is below 80 ppm.
Important: Keep cap on tight between uses. Store at room temperature.
www.KingTechnology.com
Patent 6,030,842 Made in USA 553101443N
Read
v
w
IDEAL
USE BY DATE ON BOTTLE
USE ANTES FECHA
SmartChlor
Out Indicator
Active Chlorine
pH
If lighter color,
check Smart
Chlor catridge
If darker
color, OK
If lighter color,
turn cartridge
setting up
1 number
If darker color,
turn cartridge
setting down
1 number
Just Dip and Read
Test Strips
From
Specially made
for use with
FROG
Mineral Systems
50
100
250
450
800
Calcium
Hardness
Hot Tub
IDEAL
IDEAL
3.
4.
