18
1.
2.
3.
4.
5.
POOL FROG XL Pro Cyclers Maintenance
Replacing the Control Dial O-Rings
Using a needle nose pliers,
find the snap ring tail
located at approximately
the five o’clock position
under the control dial.
Pull down and out of the
groove.
Carefully replace the rubber
O-ring without stretching
it. Apply silicone lubricant,
that came with your POOL
FROG XL Pro Cyclers, on the
O-ring.
Push control dial
completely into the
housing and turn the dial
to setting 2.
7.
Using a small screwdriver
or pointed tool to help
guide it, make sure the
snap ring stays in the
groove as it is inserted.
SILICONE
LUBRICANT
6.
Using a large screwdriver,
loosen the control dial.
Carefully pry the dial until it
pulls out.
Insert the non-lipped end
of snap ring into the groove
opening beginning at the
5 o’clock position and push
it up so that it threads itself
around the control dial.
Product # 01-22-9970
