Pontiac Solstice 2010, Руководство пользователя, Страница: 116 / 390

Storing the Roof Panel
After removing the panel place it on a flat surface with a
soft protective covering. The panel must be stored
with the interior surface resting flat.
Installing the Roof Panel
{
WARNING:
An improperly attached roof panel may fall into or
fly off the vehicle. You or others could be injured.
After installing the roof panel, always check that it
is firmly attached by pushing up on the underside
of the panel. Check now and then to be sure the
roof panel is firmly in place.
Notice: If you drop or rest a roof panel on its
edges, the roof panel, paint and/or weatherstripping
may be damaged. Always place the roof panel in
the stowage receivers after removing it from
the vehicle.
In most cases, it makes it easier if two people re-install
the roof panel.
1. Park on a level surface and set the parking brake.
Shift an automatic transmission into (P) Park. Shift
a manual transmission into (N) Neutral.
2. Check that the front release latches and the rear
release latch on the vehicle’s roof opening are
in their opened positions before attempting to
install the roof panel.
3. Carefully place the roof panel over the top of the
vehicle.
4. Position the rear edge of the roof panel on the back
of the roof opening. Then align and fit the pins at the
rear of the roof panel. Gently lower the front edge of
the roof panel to the front of the roof opening.
3-34