PM605A Hardware Instruction Manual
30
3.9 DC Test (5A)
In this unit, users can make DC sample and calibrate DC current transmitter based on percentage
of rated value.
I0 A
Out
%
DC TEST (5A)
Trans.
Range
OutType
Start Udc IN
RET
0
100
I0
4-20mA
1-Way
0.00000
DC In mA Err %
0.0000
I1 A
I2 A
0.0000
0.0000
I3 A
0.0000
Figure 3-8 DC Test (5A) interface
DC Test (5A) interface:
Right: users can set calibration parameters;
Left: Four-phase voltage amplitudes and phase output values are based on the users’
setting;
Lower left: DC measurement result is showed in DC ln area. User presses the second
button to select DC current measurement value (input IdcL) or DC voltage measurement
(input Udc). The transmitter calibration error is showed in Err area.
