Polytec PDV-100, Руководство пользователя

Страница: 7 / 63

1-3
1 Safety Information
1.2.2 Safety Precautions
Pay attention to the following safety precautions when using the instrument:
•
Only qualified and fully trained persons should be entrusted with setting
up the instrument, adjusting and operating it !
•
Avoid looking directly into the laser beam with the naked eye or with the
aid of mirrors or optical instruments !
WARNING!
Danger from laser light ! It can be dangerous to look directly into the laser beam for any
length of time.
NOTE!
Wear suitable laser protection glasses when you have to look at the target area of the laser
beam long and hard to set it up !
•
Never intentionally direct the laser beam at anyone !
WARNING!
Danger from laser light ! Do not use any reflective tools, watches etc. when you are
working in the beam path of the laser !
•
Only open the beam shutter when making measurements !
•
To position the instrument, always close the beam shutter. The beam
shutter should not be opened until the sensor head has been roughly
aligned and mounted securely !
•
The laser beam should be terminated at the end of its intended path
where this is practically possible.
•
Instruments which are not in use should be stored in places which
unauthorized persons do not have access to.