Polycom MGC Administrator, Руководство администратора

Страница: 65 / 584

MGC Administrator’s Guide
3-15
12. Click Next to continue.
The Spans and Phones dialog box opens.
Spans and Phones Dialog Box
This dialog box is used to assign circuit identification numbers and the dial-in
phone number ranges to be used in dial-in conferences. Circuit orders are
automatically assigned to spans. The dial-in phone numbers are allocated to
the MCU by your service provider (carrier) and should be obtained from the
service provider. You specify the range of dial-in numbers in the
Spans and
Phones dialog box by entering the first and last numbers in the range. You can
define several ranges for the same span.
To define
a span To define a dial-in phone
numbers range
To delete a
currently
defined dial-in
numbers range
To allocate dial-
in numbers for
Gateway calls
To delete
allocated dial-in
numbers for
Gateway calls
List of dial-in
phone numbers
and their
ranges
allocated to the
Gateway
The number used
to identify the
MCU
To remove a
span