Polycom MGC Administrator, Руководство администратора

Страница: 513 / 584

MGC Administrator’s Guide
B-3
COMMx
In Modem connection, the COMM port x can be 1,2,3,4,5 or 6.
In Null Modem connection, x is either 1 or 2, depending on the serial port
used.
CON_TYPE - Connection type. May be either MODEM or DIRECT .
MODEM stands for a modem connection. Modem configuration requires
MODEM_SETUP_STRING and MODEM_HANGUP_STRING (and if they
are not specified, the default values are taken).
•
MODEM_SETUP_STRING - This is a combination of configuration
parameters of the specific modem type and the PPP driver’s CHAT
Script.
Since the modem is only expected to answer calls, the initialization
string is the default value that can be used with most of the standard
modems. However, if a non-standard modem is used, or if a special
feature of the modem is to be used, the parameters can be (carefully!)
changed.
This parameter is ignored if CON_TYPE=DIRECT.
•
MODEM_HANGUP_STRING - This is a combination of the hang-up
parameters of the specific modem type and the PPP driver’s CHAT
Script.
Since the hang-up string is simple, the default value can be used with
most of the standard modems. However, if a non-standard modem is used
or if a special feature of the modem is to be used, the parameters can be
(carefully!) changed.
This parameter is ignored if CON_TYPE=DIRECT.
•
BAUD - Serial Port’s baud rate. May be 300, 1200, 2400, 4800, 9600,
19200, 38400, 57600 or 115200.
Default value: 19200.