Pair Poly Studio R30 with the Bluetooth Remote Control
Pair the Bluetooth remote control manually for first-time pairing, after you re-enable Remote Control Connection, or
after you restore defaults on Poly Studio R30.
Task
1 Launch Poly Lens Desktop.
2 Connect Poly Studio R30 to your computer, and select Poly Studio R30 from the list in the left sidebar.
3 Select Settings.
4 Select Admin.
5 Select the Remote Control Connection toggle.
Note:
If you disable Remote Control Connection, the Bluetooth remote control disconnects from the Poly Studio R30
device. You must pair the device manually after you re-enable Remote Control Connection.
6 On the Poly Studio R30 Overview page, select Pair Bluetooth Remote
.
The LED blinks alternate blue and white during the pairing process.
7 Long press Mute
on the remote control until you hear a notification sound.
Connect Poly Studio R30 to a Bluetooth Device
Connect the Poly Studio R30 device to a Bluetooth device such as a mobile phone, a computer or laptop, or a tablet to use
it as your Bluetooth device’s speaker and microphone.
Poly Studio R30 only supports one Bluetooth connection at a time, but you can connect it to a computer over USB and to a
phone over Bluetooth. When connected via Bluetooth, Poly Studio R30 works as an audio device.
Task
1 On the remote control, long press Bluetooth
to enable pairing mode.
The device blinks alternate blue and white with a short tone.
2 On your device, enable Bluetooth and select Poly Studio R30 from the list of available devices.
The LED indicator glows solid blue for 2 seconds with a rising tone.
The LED indicator goes back to solid white, and you can start playing music or make phone calls from the Poly Studio R30
speakerphone once you connect.
Saving Shortcuts for Your Favorite Camera Angles
Save multiple settings for pan, tilt, and zoom for the Poly Studio R30 camera.
The optional Poly remote control can save two presets to adjust the camera to your saved angle directly when the tracking
mode is off.
Save a Camera Preset
The two numbered buttons on the Poly remote control serve as preset shortcuts.
Turn off tracking mode before you use camera presets.
Task
1 Adjust the camera to the desired position.
2 Press the 1 or 2 button on the remote control until you hear a brief tone.
Important:
If the button already has a saved setting, your new setting overwrites it.
Load a Camera Preset
If your camera doesn’t track the speaker, use the preset buttons on the remote control to adjust the camera angle.
14
