Instruction Manual
RECHARGEABLE DRILL DRIVER-REVERSIBLE
PLCD-05-18V
Please read this handbook carefully before using the tool
Ningbo Hanpu Tools Co., Ltd
Gangtou Middle Street, Hengxi Town, Ningbo, Zhejiang 315135 P.R. China
1.
Chunk 10 mm
4. Torque control ring
2. Rotation direction switch
5. Battery retaining clip
3. On/Off switch
6. Battery
TECHNICAL INFORMATION
Characteristics
Feeding
18 volts hydrogen-nickel
Speed
0-550 rpm
Torque control ring
17 positions
Chunk
10 mm max
Battery charger
normal
1. NOTES ON SAFETY AND ACCIDENT PREVENTION
Please read this handbook carefully before using the tool.
Caution !
The machine can begin to operate immediately when the ON/OFF
switch is activated..
2. SAFETY INSTRUCTIONS
- Ensure that the battery is properly secured in the drill.
- Change rotational direction only when drill is not moving.
- Battery and charger are specifically designed for cooperative use.
- Do not expose battery to heat or flames.
- Avoid repeated consecutive rapid charges of the battery.
- Never discharge the battery completely and recharge occasionally if not
used for a prolong period.
3. BEFORE USE
- If the machine is new the battery must first be charged.
- A new battery or one which has not been used for an extended period
achieves full performance only after approximately 5 charging and
discharging cycles.
4. BATTERY CHARGER
- Always inspect battery charger, cord and plug
before use.
- Protect battery charger against humidity and
operate only in dry areas.
- The supplied charger is suitable for charging
batteries only.
Charging the battery
- Press the battery retaining clips and remove
battery from handle.
- Plugging the battery in the battery charger.
- Battery and battery charger become warm during
the charging process.
- After termination of the charging (approx. 3h) pull
charger out of socket and remove battery.
COMMENT:
- To prevent incorrect battery inserting on the charger, please insert the
battery pack according to the position of the grill to the charger.
- Disconnect the feeding before connecting or disconnecting the battery
- The charger must be used only with rechargeable battery.
- Do not expose the charger to rain or water
- The charger work together with power adaptor.
5. ROTATION DIRECTION AND LOCK
- Set rotation direction switch to center position(lock-out).Insert charged
battery handle and secure the battery clips.
- Set rotation direction switch to desired position. To switch on press
ON/OFF switch 3. To switch off release ON/OFF switch 3.
- Set rotation direction by changing of switch 2 position left and right. In
middle position On/Off button 3 is locked.
6. OPERATING INSTRUCTIONS
- Clamp screwdriver blade directly into the
chuck.
- Use torque ring to control in low number
position for small screws and soft materials and
in high number position for large screws and
hard materials.
7. GUARANTEE
Within 6 months from the date of purchase we guarantee repairing all
defective parts free of charge or replace the drill in case of:
-The product is returned with evidence of purchase date.
-The product has been purchased for the user and not used for hire
purposes.
-The product has not been misused or carelessly handled.
-Repairs have not been attempted by persons other than our Service Staff.
SAFETY INSTRUCTIONS
When using electric tools basic safety
precautions should always be followed to reduce the risk of fire electric
shock and personal injury.
For safe operations:
1. Keep work area clean.
2. Don’t expose power tools to rain. Don’t use power tools in damp or wet
locations. Don’t use power tools in presence of flammable liquids or gases.
3. Prevent body contact with surface under high voltage.
4. Keep childrens away from tool and work area. When not in use tools
should be stored in dry, high or locked up place out of the reach of children.
5. Don’t force the tool.
6. Use right tool. Don’t force small tools or attachments to do the job of a
heavy duty tool. Don’t use tools for purposes not intended for exampled
don’t use circular saw for cutting tree limbs or logs.
7. Dress properly. Do not wear loose clothing or jewelry. Rubber gloves and
non-skid footwear are recommended.
8. Use safety glasses.
9. Periodically check for damaged parts. If you find damaged parts do not
use tool any more. Take the instrument in the importer's authorized service.
2
3
5
6
EN
BJ 2006
All manuals and user guides at all-guides.com
all-guides.com
