manualshive.com logo in svg

Poly P010, Руководство администратора, Страница: 58 / 101

Поделиться
Скачать
Poly P010 Скачать руководство пользователя страница 58

Configure IP Microphones

You can configure IP table and ceiling microphone settings for your system.

The Studio X50 and Studio X30 don’t support IP microphones.

Procedure

1.

In the system web interface, go to 

Audio/Video

 > 

Audio

 > 

Audio Input

.

2.

Configure the following settings (your changes save automatically):

Setting

Description

Stereo Mode

Positions the audio input within the left and right
channels. 

Left

 sends all of the audio to the left channel.

Right

 sends all of the audio to the right channel. For

Poly table microphone and ceiling microphones, 

Left

+Right

 sends audio from one microphone element to

the left channel and audio from a second element to
the right channel.

Autorotation

Specifies whether the system uses autorotation for Poly
microphones. If you enable this feature, the system
automatically assigns left and right channels for the
microphone based on the sound it senses from the left
and right speakers.

Audio Meter (dB meter)

Shows you the peak input signal level for Poly
microphones.

Configuring the Microphone Adapter

Your system automatically configures the microphone adapter when you connect it.

The Studio X50 and Studio X30 don’t support microphone adapters.

Note the following when using the microphone adapter:

▪ Polycom StereoSurround software isn’t available when using the microphone adapter.
▪ You can see the audio input level (single channel meter) in the local interface and the system web

interface.

Related Links

Poly Microphone IP Adapter

 on page 21

Polycom Acoustic Fence

Polycom Acoustic Fence technology creates a virtual 

audio fence

 that blocks sounds from outside the

fence. It suppresses background noise during calls to enhance audio quality for call participants.

Note:

This feature is only available on the G7500 system.

Polycom Acoustic Fence works in mono mode only and disables Polycom StereoSurround when enabled.

Polycom Acoustic Fence technology provides the following:

Configuring Audio Settings

57

Содержание P010






































































































Отзывы:

Нет отзывов