3.
Select
Dial
.
The phone plays a tone and the contact’s phone answers the call automatically.
4.
After your contact answers the call, speak your message and select
End Call
.
Place an Intercom Call During a Call
You can place an intercom call to another contact during an active call.
Procedure
1.
Select
Hold
>
Intercom
.
The active call goes on hold and the dialpad displays.
2.
Enter a number or select a contact.
3.
Select
Dial
.
The phone plays a tone and the contact’s phone answers the call automatically.
4.
After your contact answers the call, speak your message and select
End Call
.
5.
Select
Resume
.
Managing Multiple Calls
Manage multiple active, incoming, or held calls.
In the
Calls
screen, you can view active and held calls, including conference calls. The following figure
shows an active call and a held call.
Figure 12: Multiple calls on the calls screen
Manage a Call from the Calls Screen
From the
Calls
screen, you can manage a call by holding, resuming, or transferring the call.
Procedure
1.
Select a call.
2.
Do one of the following:
• Select
Hold
to place an active call on hold.
• Select
Resume
to make a held call active.
• Select
End Call
to end a call with a contact. You can end active calls only, so resume the
held call first before ending it.
• Select
Transfer
to send the call to another contact.
Transferring Calls
You can transfer active or held calls to another contact.
Use one using the following transfer types:
• Blind transfer - Transfers the call directly to another line without speaking with the other party first.
• Consultative transfer - Enables you to speak with the other party before completing the transfer.
Audio Calls
37