POLTI Vaporetto Smart 100, Инструкция по эксплуатации

Страница: 15 / 52

13.4 Unscrew the boiler cap.
13.5 Pour 8.5 fl oz (0.25 l) of
cold water into the boiler.
13.6 Rinse the boiler and pour the water into
the sink or into a special container. If the
water is very dirty, repeat the operation until
it is clean.
13.7 Insert 3.5 fl oz (0.1 l) of water in the boiler
and screw on the boiler cap and the boiler
cap protection, ensuring that they are
correctly screwed on.
13.8 Refill the water tank.
13.9 Turn the appliance back on.
Before using steam to clean, direct the jet
into a sink or other container until the steam
is completely clean.
14. KALSTOP (PANA0001) optional
Kalstop is the limescale product for
appliances with boiler for ironing and steam
cleaning.
Regular use of Kalstop, every time the tank is
filled with water:
- Extends the life of the appliance.
- Allows emission of a “drier” steam
- Prevents limescale build up.
- Protects the walls of the boiler.
- Contributes to saving energy.
15. STORAGE
15.1 Turn off the appliance and disconnect
from the mains electricity.
15.2 Wait for the appliance to cool down
completely before storing it.
15.3 It is possible to store
the appliance by placing
the brush (including the
frame) and the hoses in the
parking unit.
15.4 The smaller
accessories can be stored
inside the accessories
compartment.
Do not pour toxic substances, acids,
solvents, detergents, corrosive substances
and/or explosives or perfumes into the
boiler.
| 15 |
E
N
G
L
IS
H