POLTI Vaporetto Smart 100, Инструкция по эксплуатации

Страница: 14 / 52

10. OTHER GENERAL USES
10.1 BRIGHTENING UP CURTAINS AND
DRAPES
Mites and dust can be removed from curtains
and drapes by steaming the fabric with just
the handle. The steam can remove odours
and brighten up colours, allowing the fabric
to be washed less frequently.
For this surface, set the steam to Minimum
level.
10.2 REMOVING STAINS FROM CARPETS
AND UPHOLSTERY
Direct the steam directly onto the stain with
the greatest angle possible (never vertically
with respect to the surface to be cleaned)
and place a cloth beyond the stain to collect
the dirt that has been “blown” away by the
steam pressure.
For this surface, set the steam to Minimum
level.
10.3 TAKING CARE OF PLANTS AND
HUMIDIFYING ROOMS
To care for your house plants, remove the
dust from the leaves using the steam. Steam
the surface directly from the handle, at a
minimum distance of 1.6 ft (50 cm), adjust the
steam to the Minimum level.
Plants breathe better and will be cleaner and
brighter. The steam can also be used to
refresh rooms, especially those frequented by
smokers: steam the room by directing the jet
towards the ceiling and distributing evenly.
11. OUT OF WATER
A lack of water in the boiler
is indicated by the out-of-
water light B coming on.
To resume use, simply:
- switch off and disconnect the Polti
Vaporetto.
- fill the tank as described in Section 1.
- connect the Polti Vaporetto and turn it back
on.
12. GENERAL MAINTENANCE
Before carrying out any maintenance on the
device, always unplug it from the power
mains making sure that the product has
cooled down before proceeding.
To clean the outside of the appliance, use
only a damp cloth and tap water.
All accessories can be cleaned using running
water, ensuring they are completely dry
before the next use.
Do not use detergents of any type.
After using the brushes, we recommend
letting the bristles cool down in their natural
position, in order to avoid any deformation.
13. CLEANING THE BOILER
(special maintenance)
To maintain optimum performance, clean the
boiler every 10/20 uses depending on the
amount of limestone in the water.
13.1 Unplug the appliance and let it cool down
for 2 hours at least, if it is hot.
13.2 Empty the water tank to prevent leakage.
13.3 Place the appliance on
its side and unscrew the
boiler cap protection
located on the side of the
appliance.
WARNING: Steam.
Risk of scalding!
This operation must always be done after ha-
ving disconnected the appliance from the
mains.
WARNING: Steam.
Risk of scalding!
Risk of scalding! When accessing the boiler
(removing the cap, filling up, emptying),
ensure that the appliance is switched off at
the power switch and disconnected from
the mains for at least two hours.
Before cleaning the surface, always do a test
on a hidden area and see how it reacts to the
application of steam.
| 14 |
E
N
G
L
IS
H