Automatically setting to standby
(Auto standby function)
Switch the auto standby function on or off.
When the auto standby function is turned on, the power supply
for this unit automatically switches to standby if no operations
have been performed for approx. 20 minutes or more and audio
is not being output.
1
Press and hold
3
for 5 seconds or more.
0
The auto standby function switches on or off and the
status LED blinks as indicated below.
.
Off
On
(Default)
Auto standby
function
Reducing the standby power
consumption (Deep standby
function)
This unit can be placed into deep standby mode, in which its
standby power consumption is lower than in normal standby
mode. Perform the following steps to put this unit into deep
standby mode.
1
Press and hold VOICE ADJUST 3 for about 5 seconds
or more.
0
The deep standby function switches on or off and the
status LED blinks as indicated below.
.
Off
(Default)
On
Deep standby
function
28
