Adjusting the volume
1
Use VOL + or VOL – to adjust the volume.
When the button is pressed, the status LED lights up to
match the current volume.
0
Each time a volume button is pressed, the status LEDs
blink and the number of LEDs that are blinking increases
or decreases according to the volume that is set.
0
The status LEDs blink three times when the maximum or
minimum volume is reached.
0
When the power is turned on, the unit starts with the volume level that
was set before being placed on standby. However, if the volume was
previously set to high, it starts with the volume setting lowered to a
certain level.
Adjusting the subwoofer volume
1
Use BASS + or BASS – to adjust the subwoofer
volume.
When the button is pressed, the status LED lights up to
match the current subwoofer volume.
0
The status LED blinks each time the button is pressed,
and the number of flashing LEDs increases or decreases
to match the subwoofer volume.
0
When the subwoofer volume reaches the maximum or
minimum, the status LED blinks three times.
Turning off the sound temporarily
1
Press .
All status LEDs blink.
0
To cancel, press
again.
24
