Polestar 2 2020, Руководство пользователя

Страница: 409 / 568

Programming
HomeLink
®
Program HomeLink
®
, reset programming or
reprogram individual buttons.
Programming HomeLink
®
1. Aim the remote control towards the Home-
Link
®
button to be programmed and hold it
approx. 2-8 cm (approx. 1-3 inches) from the
button. Do not obstruct the indicator lamp on
HomeLink
®
.
2. Press and hold depressed both the button on
the remote control and the button to be
reprogrammed on HomeLink
®
.
3. Do not release the buttons until the indicator
lamp has switched from flashing slowly
(approx. once per second) to either flashing
quickly (approx. 10 times per second) or illu-
minating with a constant glow.
> If the indicator lamp illuminates with a con-
stant glow: The programming has been
completed.
Press the programmed button twice to
activate.
If the indicator lamp flashes quickly: The
device being programmed to HomeLink
®
may have a security function that requires
extra steps.
Test by pressing the programmed button
twice to see whether the programming is
working. Otherwise, continue with the fol-
lowing steps.
4. Locate programming button
145
on the
receiver for the garage door or similar. It is
normally located close to the antenna's
bracket on the receiver.
5. Depress and release the receiver's program-
ming button once.
The programming must be completed within
30 seconds of the button being depressed.
6. Press and release the button on HomeLink ®
that you want to program. Repeat the
sequence of pressing/holding/releasing a
second time and, depending on the receiver
model, even a third time.
> The programming has been completed.
Reprogramming individual buttons
1. Press the desired button and hold it
depressed for approx. 20 seconds.
2. Once the indicator lamp on HomeLink ®
starts
to flash slowly, programming can continue as
normal.
Resetting the HomeLink
®
buttons
It is only possible to reset all of the HomeLink
®
buttons at the same time. Individual buttons can
only be reprogrammed.
145 Button designation and colour varies between manufac-
turers.
>>
Starting and driving 409