Polestar 2 2020, Руководство пользователя

Страница: 349 / 568

Charging the high
voltage battery
The car is equipped with a rechargeable high
voltage battery of lithium-ion type.
The high voltage battery is charged using a
charging cable.
The battery can also be charged via charging
stations with an integrated control device. The
charging stations can be equipped with either a
permanent charging cable or a socket where a
special charging cable with a matching connec-
tor, known as a mode 3 charging cable, can be
connected.
Fast charging
Besides charging via a 230 V socket (alternating
current), the car supports fast charging with
direct current via charging stations that support
the CCS (Combined Charging System) stand-
ard. A higher charging power can normally be
achieved by charging with direct current, and
the charging time can therefore be reduced. The
maximum charging power is normally achieved
when the charge level of the high voltage bat-
tery is 0-80%. When the charge level increases,
the power will be reduced in order to reduce
wear.
The time it takes for the high voltage battery to
be charged is dependent on the charging power
that is used.
Charging cable handle and charging input
socket
Charging cable handle and charging input
socket.
Charging status is indicated in the following
ways:
• Indicator on the charging cable's control unit.
• Indicator lamp in the car's charging input
socket.
• Illustration and text in the driver display.
The 12 V battery is charged when the high volt-
age battery is charging and is interrupted when
the high voltage battery is fully charged. It is not
possible to drive the car while it is charging.
High voltage battery performance may be
reduced if the temperature in the batteries is too
low or too high.
>>
Electric operation and charging 349