Polaroid PRO5023PVE01, Руководство пользователя, Страница: 33 / 84

-33-
default storage at factory. You can directly use it without making any
settings.
Use as flash disk:
If “Phone——Data Wire——PC” is well connected,
the PC will prompt “New hardware is found”, and“MT65xx Android
Phone requires to be installed” will appear in the dialog box, see the
figure below:
Check the relevant menus in the phone are opened or closed, selecting
one by one as follows:
Main Menu - Settings - Application - Development - USB debugging.
Uncheck “USB debugging”.
After checking and confirmation, reconnect
“Phone - Data Wire - PC”,
and make sure SD card has been inserted, the phone and SD Card
trough are normal. Follow the prompts appearing in the phone to
operate, so that data uploading and downloading with U disk can be
achieved.
。
Note: The phone hard disk used as U disk not supported, SD card
supported only.
Your mobile phone supports the plug-in feature. However, if you insert
or remove the SD card without turning off your phone, we advise you to
turn on and off your phone, to ensure its normal operation. Generally, it
is not recommended to remove and install the SD card.
8 FAQs and Solutions
If you have any questions about the phone, please find the
solutions from the table below.