Polaris SuperSport страница 33 Скачать руководство пользователя

Страница: 33 / 137

THE PERFECT FIT

Front Suspension Adjustments

Shock Damping (Indy Select Shock)

Adjustments to the compression stiff-

ness of Indy Select shocks can be

made by turning the adjustment screw

located near the base of the shock (

This adjustment is the easiest to per-

form and it should be considered first.

The factory setting for this shock is the

softest position, with the adjusting

screw all the way out (counterclock-

wise). If bottoming occurs, the Indy

Select feature should be used to

achieve the desired ride.

NOTE:

An excessive adjustment can result in damage to the shock.

When adjusting these shocks, we recommend that you turn the

screw only 1/4 turn at a time, then test ride.

• Turn the screw clockwise to increase compression and stiffen the ride.
• Turn the screw counterclockwise to decrease compression and soften

the ride.

• Always adjust both shocks equally.

Front Springs

For models without externally adjustable or revalvable shocks, the front

springs can be changed if spring preload alone isn't sufficient and fur-

ther adjustment is desired to control suspension stiffness. See your

Polaris dealer for more information.

Содержание SuperSport










































































































































Результаты поиска

Содержание SuperSport

Отзывы:

Похожие инструкции для SuperSport

Бренды по названию

Популярные бренды

Polaris SuperSport, Руководство пользователя

Результаты поиска

Содержание SuperSport

Отзывы:

Похожие инструкции для SuperSport

Бренды по названию

Популярные бренды