Polaris SLINGSHOT GRAND TOURING 2019 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 147

Polaris SLINGSHOT GRAND TOURING 2019 Скачать руководство пользователя страница 36

BRAKE PEDAL

Depress the brake pedal

w

to slow or stop the vehicle. Apply the brakes while

starting the engine.

NOTE

The SLINGSHOT brakes are not power-assisted. Braking the SLINGSHOT
may feel different than braking other types of vehicles. Practice braking in a

safe area to become familiar with the feel of the SLINGSHOT brakes before

driving in traffic.

THROTTLE PEDAL

Depress the throttle pedal

e

to increase engine speed and (when the

transmission is in gear) vehicle speed. Spring pressure returns the pedal to the
rest position when released. Always check that the throttle pedal returns
normally before starting the engine.

BRAKES

ANTI-LOCK BRAKE SYSTEM (ABS)

The anti-lock brake system automatically reduces or increases brake pressure
as needed to provide optimum braking control, reducing the chance of wheel
lock-up during hard braking events or when braking on rough, uneven, slippery
or loose surfaces.

WARNING

No stability control, traction control or anti-lock braking system can fully protect

you from every situation. Always be mindful of road conditions. Always drive

safely and within the limits of the driver, vehicle and road conditions.

WARNING

Stability control, traction control and anti-lock braking systems rely on grip

between the tires and the road to function properly. In a hydroplane situation,

tires lose contact with the road and the effectiveness of these features may be

diminished.

• The anti-lock brake system cannot be turned off.
• When the lamp is illuminated, the anti-lock brakes will not activate, but the

conventional brake system will continue to operate normally. See your dealer
or another qualified person promptly for service.

• Operating with non-recommended tires or improper tire pressure may reduce

the effectiveness of the anti-lock brake system. Always use the recommended
size and type of tires specified for your vehicle. Always maintain the
recommended tire pressure.

34

FEATURES AND CONTROLS

Downloaded from

«
...
34
35
36
37
38
...
»

Содержание SLINGSHOT GRAND TOURING 2019




















































































































































Отзывы:

Нет отзывов