Polaris RZR XP 4 TURBO S VELOCITY 2019 Скачать руководство пользователя страница 166

Страница: 166 / 222

9. Reinstall the air box cover and ensure the alignment tabs are properly

positioned.

10. Secure the four (4) cover clips.

11. Reinstall the cargo box access panel.

SPARK ARRESTER

WARNING

• Never operate the vehicle without the spark arrester.
• Remove any combustible materials from the area.

Failure to heed the following warnings while servicing the spark arrester

could result in serious injury or death.

• Never run the engine in an enclosed area. Exhaust contains poisonous

carbon monoxide gas that can cause loss of consciousness or death in a
very short time.

• Do NOT perform service on the spark arrester while the system is HOT.

Exhaust system temperatures can reach extreme temperatures. Allow
components to cool sufficiently before proceeding.

• Do not stand behind or in front of the vehicle while purging the exhaust

system.

• Never go under the vehicle while it is inclined.
• Wear eye protection and gloves while servicing.

Periodically clean the spark arrester to remove accumulated carbon. A plugged
spark arrester will affect engine performance. Clean daily when driving in mud
and water. Replace a cracked or damaged arrester before operating.

1. Remove the arrester retaining bolt

and nut

2. Remove the arrester from the end of the muffler

164

MAINTENANCE

Содержание RZR XP 4 TURBO S VELOCITY 2019































































































































































































































Результаты поиска

Содержание RZR XP 4 TURBO S VELOCITY 2019

Отзывы:

Похожие инструкции для RZR XP 4 TURBO S VELOCITY 2019

Бренды по названию

Популярные бренды

Polaris RZR XP 4 TURBO S VELOCITY 2019, Руководство владельца по обслуживанию и безопасности

Результаты поиска

Содержание RZR XP 4 TURBO S VELOCITY 2019

Отзывы:

Похожие инструкции для RZR XP 4 TURBO S VELOCITY 2019

Бренды по названию

Популярные бренды