Polaris RZR Pro R 2022, Руководство пользователя

Страница: 126 / 195

FRONT / REAR SPRING PRELOAD ADJUSTMENT
The factory setting is appropriate for nearly all riding conditions. If desired, the
suspension may be adjusted to maintain vehicle clearance height when carrying
loads. Adjusting the suspension may change vehicle handling.
IMPORTANT
The distance between the main preload ring (top ring) and the cross-over rings
(middle rings) should be constant. If you move the main preload ring, you will
need to move the cross-over rings an equal amount.The cross-over rings need
to be locked tight after any adjustment is made. To lock the cross-over rings,
take a punch and hammer to hit each side so the rings jam together. If the
cross-over rings are not locked down tight, damage to the shock may occur.
To adjust the preload, do the following:
1. Elevate the vehicle to allow the suspension to fully extend.
2. Turn the adjusting ring to the left to add preload. Turn the adjusting ring to the
right to remove preload.
Uneven adjustment may cause poor handling of the vehicle. Always adjust both
the left and right spring preloads equally or have your POLARIS dealer or
qualified person perform the adjustments.
124
MAINTENANCE