PFT-28s
Wireless Transmitter (Optional)
Wireless Frequency System: 2.4GHz
Operating Distance:
up to 100 meters / 300 feet
Channel:
16 channels
Sync:
1/250s
Transmitter Power:
1 x CR2032 battery
Function:
Wireless Flash Trigger
(for camera speed light or studio light)
Wireless Remote Control
(for DSLR camera with remote socket)
Weight:
32g (*without battery)
Dimension:
62.6 x 39.2 x 27.1mm
(*excluding protrusions)
Safety standard
CE, FCC, Canada IC
RoHS compliance
1 Slightly press the shutter mode button, the shutter mode indicator
light will ON and display the current mode
2 Press the shutter mode button again to change shutter mode
3 After finish the selecting, the shutter mode indicator will turn off
after 2 seconds
*Specifications and appearance are subject to change without notice due to improvement.
1 Turn the power of camera OFF
2 Connect the shutter release cable to the ACC socket of
transmitter and remote socket of camera body
3 Turn the power of camera ON
4 Press the test button on the transmitter
5 Half press for focus and full press for shutter release
◇
Wireless Flash Trigger for camera speed light or studio light
◇
Wireless Remote Control for DSLR camera with remote socket
a) Instant Shutter Release
b) BULB/Continuous Shooting
C) Shutter Release Delay
●
Name of Parts:
The parts are identified as follow:
1 Shutter Release/Test button
4 Indicator light
2 Shutter mode button
5 Trigger point
3 Shutter mode indicator light
6 Battery cover
7 ACC socket
●
Wired Shutter Release:
●
Wired Shutter Release:
1 Turn the power of camera and receiver OFF
2 Mount the receiver to the camera hot shoe socket and
connect the shutter release cable to the ACC socket of
receiver and remote socket of camera body
3 Set the channel selector at same position on both the
transmitter and the receiver
*To use multiple camera units, be sure to set all receivers
to the same channel
4 Turn the power of camera and the receiver ON
5 Press the test button on the transmitter
6 Select Shutter Mode
(*refer to a Shutter Mode Setting Section)
7 Half press for focus and full press for shutter release
8 If the transmitter and the receiver status lights are turning
red and your camera shutter release all of the setting are
correct
●
Shutter Mode Setting:
●
Specifications:
