manualshive.com logo in svg

Polaris FST IQ Touring, Руководство пользователя

Вы можете скачать бесплатное руководство по эксплуатации для туристического снегохода Polaris FST IQ Touring на нашем сайте. Владельцы могут легко загрузить и ознакомиться с руководством, чтобы наслаждаться всеми особенностями этого продукта. Посетите manualshive.com для загрузки.

Поделиться
Скачать
background image

153

WARRANTY

Polaris Second Year Engine Service Contract

Second Year Engine Service Contract is standard on all eligible new and unused snow-

mobiles

 

that were Snow Checked through an authorized Polaris dealer during the 

March/April Snow Check promotion. The free Second Year Engine Service Contract is 

honored by all authorized Polaris snowmobile dealers in North America and is transfer-

able 120 days after the original purchase date, free of charge, through any Polaris snow-

mobile dealer. Coverage on Snow Check units is automatic. Although you do not 

receive a warranty card, your dealership should have printed a copy of the warranty reg-

istration form. This form is your proof of warranty.

Consumer Exclusions

• Each repair visit after the first twelve months of standard warranty coverage is subject 

to a $50 deductible.

• The free Second Year Engine Service Contract applies to the first 5,000 miles or two 

(2) calendar years from date of purchase, whichever comes first. Tampering with the 

odometer shall void all warranties/service contracts. No extensions to coverage under 

this engine service contract can be given. Used snowmobiles are not eligible under this 

program.

• Snowmobiles used for commercial purposes or for racing are excluded from coverage.

Coverage

Coverage for second year engine failures due to defects in materials and workmanship 

will be determined by Polaris in its sole discretion. Coverage is automatic with no addi-

tional paperwork required. The free Second Year Engine Service Contract is subject to a 

$50 deductible per visit. Regular, documented service maintenance visits are required to 

validate this warranty.
A partial list of items excluded from coverage includes:
• Damage due to accident, fire, explosion, theft, or other causes beyond Polaris’ control.
• Damage caused by the failure of other components of the snowmobile.
• Failures caused by improper fuel or oil.
• Piston seizures, unless caused by a defective engine component.
• Failures caused due to improper adjustments.
• Failure due to unauthorized service.
• Failures due to lack of service as required in the owner’s manual or Polaris updates. 

This includes off-season storage as listed in the owner’s manual.

• Failure due to use of unauthorized parts or modifications.
• Normal wear parts, including but not limited to spark plugs, hoses, batteries, controls, 

and recoil ropes are excluded from coverage. Gaskets are covered, as are intake and 

exhaust manifolds excluding paint coverage.

• Electrical coverage is limited to the ECU box, coils, stator plate, and sensors. Wiring 

and other electrical components are excluded from coverage.

• Cooling system coverage is limited to the water pump assembly and components, fan, 

fan bearings, temperature sensor, gasket and seals.

• Non wear related throttle body parts are covered. The fuel pump is covered.
• Clutches and related clutch parts, including but not limited to, the drive belt, are 

excluded from coverage.

• Electrical components are excluded from coverage.
• Gearcases and transmissions are excluded from coverage.

Содержание FST IQ Touring






































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FST IQ Touring

Arctic Cat Sno Pro 120 Service Manual preview
Sno Pro 120
Бренд: Arctic Cat Страницы: 470

Бренды по названию

Популярные бренды

Загрузить еще бренды