Polaris ATV 2002 Скачать руководство пользователя страница 76

Страница: 76 / 181

OPERATION

Carrying Loads

2/3 of Load on

Rear Rack

1/3 of Load on

Front Rack

Important Safeguards

To reduce risk of injury or machine damage when carrying loads, read

and follow the warnings listed below:

REDUCE SPEED AND ALLOW GREATER DISTANCE

FOR BRAKING WHEN CARRYING CARGO.

CARGO WEIGHT DISTRIBUTION should be 1/3 on the

front rack and 2/3 on the rear rack. When operating over

rough or hilly terrain, reduce speed and cargo to maintain

stable driving conditions. Carrying loads on one rack only

increases the possibility of vehicle tip over.

HEAVY LOADS CAN CAUSE BRAKING AND CONTROL

PROBLEMS. Use extreme caution when applying brakes

with a loaded vehicle. Avoid terrain or situations which may

require backing downhill.

ALL LOADS MUST BE SECURED BEFORE MOVING

VEHICLE. Unsecured loads can create unstable operating

conditions, which could result in loss of control of the ve-

hicle.

Correct loading of this vehicle is necessary to maintain proper

stability and operating characteristics. Overloading or incorrect

positioning of the load affects the vehicle’s turning, stopping

distance and stability. Failure to follow loading requirements

could cause severe injury or death.

WARNING

Содержание ATV 2002






















































































































































































Результаты поиска

Содержание ATV 2002

Отзывы:

Polaris ATV 2002, Руководство пользователя, Страница: 76 / 181

Результаты поиска

Содержание ATV 2002

Отзывы: