Polaris ATV 2002 Скачать руководство пользователя страница 69

Страница: 69 / 181

OPERATION

Pre Ride Inspection

Use the following checklist to verify your machine is in proper

working order each time you ride.

Item/Inspection Procedure

1. Tires - check condition and pressures

2. Fuel and oil tanks - fill both tanks to their proper levels
3. All brakes - check operation, adjustment and fluid level (includes

auxiliary brake)

4. Throttle - check for free operation and closing
5. Headlight/Taillight/Brakelight - check operation of all indicator

lights and switches

6. Engine stop switch - check for proper function

7. Wheels - check for tightness of wheel nuts and axle nuts; check

that axle nuts are secured by cotter pins

8. Drive chain - condition and slack; refer to drive chain adjustment

9. Air cleaner element - check for dirt; clean or replace
10. Steering - check for free operation noting any unusual looseness in

any area

11. Loose parts - visually inspect vehicle for any damaged components

or loose nuts/bolts or fasteners

12. Operators helmet, goggles and clothing
13. Engine coolant - (Liquid Cooled Models Only) check for proper

level at the recovery bottle

You must inspect your ATV each time before riding to ensure it is

in proper working order. If proper inspection is not done, severe

injury or death could result.

WARNING

Содержание ATV 2002






















































































































































































Результаты поиска

Содержание ATV 2002

Отзывы:

Polaris ATV 2002, Руководство пользователя, Страница: 69 / 181

Результаты поиска

Содержание ATV 2002

Отзывы: