62
CONTROLS AND FEATURES
Features
Electronic Speedometer
When the programmed hours are reached,
SEr hr
will light; when the
programmed distance is reached,
SErdIS
will light. Each time the
vehicle is started, the reminder will turn on and remain lit until the
button is pushed or the speedometer is reprogrammed for the next
service interval.
Accessing Sub-menu Features
There are two methods for accessing the sub menu:
1. Press and hold the button and turn the power on
2. Press and hold the button for 8 seconds
Hold the button until the display shows
POLArS
then release the
button. The speedometer is now in the sub-menu. To display each
mode, press the button once to scroll through the four available
functions. Each function will be displayed as follows:
Service Hours
SET hr
Service Distance
SETdIS
Miles to Kilometers
COnvrT
No Menu Changes
DOnE
Changing Distance Measurement
1. Access the sub-menu
2. Select
COnvrT
and release the button. If the last digit in the
odometer display is K, the current measurement is kilometers; if
the last digit is M, distance is being measured in miles.
To Set Service Hours
1. Access the sub--menu
2. Toggle to
SET hr
, then release the button.
3. In 3 seconds, the LCD will display 5 digits, with the left--most
digit flashing.
4. Within 4 seconds, press and release the button to change the digit.
Once the digit is changed once, the button may be held to scroll
through the digits from 0 to 9.
5. After the digit has been selected, do not push the button. After 4
seconds the next digit will flash.
Содержание ATV 2002
