Polaris ATV 2002 страница 50 Скачать руководство пользователя

Страница: 50 / 181

CONTROLS AND FEATURES

Controls

Parking Brake

Setting the Parking Brake

1. Squeeze the left hand brake

lever two or three times and

hold it.

2. Push the park brake lock (2)

into the notches on the master

cylinder body. Release the

brake lever.

3. To release the parking brake

lock, squeeze the brake lever.

It will return to its released

position.

Important Safeguards

The parking brake may relax when left on for a long period of time.

This could cause an accident.

Do not leave the vehicle on a hill depending on the parking

brake for more than five minutes.

Always block the downhill side of the wheels if leaving the ATV

on a hill or park the ATV in a side hill position.

Always check to be sure that the parking brake has been

disengaged before operating the ATV. An accident could result

causing severe injury if the parking brake is left on while the ATV

is operated.

WARNING

Содержание ATV 2002






















































































































































































Результаты поиска

Содержание ATV 2002

Отзывы:

Похожие инструкции для ATV 2002

Бренды по названию

Популярные бренды

Polaris ATV 2002, Руководство пользователя

Результаты поиска

Содержание ATV 2002

Отзывы:

Похожие инструкции для ATV 2002

Бренды по названию

Популярные бренды