64
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 59. Items not listed in the
chart should be lubricated at the General Lubrication interval. See page
111 for the part numbers of Polaris products.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item
Lube
Method
Engine Oil
PS-4 PLUS Performance
Synthetic 2W-50
See page 66.
Brake Fluid
DOT 4 Only
See page 32.
Drive Chain(s)
O-ring chain lube or SAE
80/90
Lubricate.
Transmission Oil
AGL Synthetic Gearcase
Lube
See page 70.
Front Gearcase
ATV Angle Drive Fluid
See page 72.
Front Prop Shaft
Yoke
Premium U-Joint Lube
Grease fittings (3 pumps maximum)
every 500 miles (800 km), before long
periods of storage, or after pressure
washing or submerging.
Front Hubs
Premium Hub Lube
Remove set screw in hubs. Rotate
wheels to 4 o'clock position. If lubricant
is not visible add more. Reinstall set
screw.
Swing Arm
Bushings
X
Premium All Season
Grease
Locate fittings on swing arm and
grease with grease gun
Axle Housing
Ball Joint
X
Premium All Season
Grease
Locate fitting on back side of struts and
grease with grease gun.
Tie Rod Ends
X
Premium All Season
Grease
Lift boot, clean away dirt and grease,
apply fresh grease by hand and reas-
semble. Perform when suspension
action becomes stiff, or after washing.
Содержание 2009 Scrambler 500 4X4
Страница 1: ......
Страница 128: ...125 MAINTENANCE LOG DATE MILES KM OR HOURS TECHNICIAN SERVICE PERFORMED COMMENTS...