Polaris 2008 Outlaw 450 S Скачать руководство пользователя страница 59

Страница: 59 / 218

Features and Controls

Throttle Lever

The throttle lever is located on the right handlebar.

Squeeze the lever toward the handlebar to increase

engine speed and vehicle movement. Engine speed

returns to idle when the lever is released. See page 155

for throttle adjustment procedures.

NOTE:

Fuel is injected into the intake passage each time

throttle is applied. Do not squeeze the throttle lever

while starting the engine. Do not squeeze the throttle

lever when the engine is stopped.

WARNING

Operating with sticking or improperly operating throttle controls could cause an accident and lead to

severe injury or death. Never start or operate the vehicle with an improperly operating throttle.

Always contact your dealer for service if throttle problems arise.
Failure to check or maintain proper operation of the throttle system can result in an accident if the

throttle lever sticks during operation. Always check the lever for free movement and return before

starting the engine. Also check occasionally during operation.

Throttle Lever

Содержание 2008 Outlaw 450 S



























































































































































































































Результаты поиска

Содержание 2008 Outlaw 450 S

Отзывы:

Polaris 2008 Outlaw 450 S, Руководство пользователя, Страница: 59 / 218

Результаты поиска

Содержание 2008 Outlaw 450 S

Отзывы: