Polaris 2008 Outlaw 450 S Скачать руководство пользователя страница 25

Страница: 25 / 218

Safety

Operator Safety

• Always check for obstacles or people

behind the ATV before operating in

reverse. When it's safe to proceed in

reverse, move slowly and avoid turning at

sharp angles.

• Always use the size and type of tires

specified for your ATV, and always main-

tain proper tire pressure.

• Never modify an ATV through improper

installation or use of accessories.

• Never exceed the stated load capacity for

your ATV.

• Always remove the ignition key when the

vehicle is not in use to prevent unautho-

rized use or accidental starting.

FOR MORE INFORMATION ABOUT ATV SAFETY, call the Consumer Product Safety

Commission at 1-800-638-2772, or visit www.cpsc.gov, visit www.atvsafety.org, or call

Polaris at 1-800-342-3764.

Содержание 2008 Outlaw 450 S



























































































































































































































Результаты поиска

Содержание 2008 Outlaw 450 S

Отзывы:

Polaris 2008 Outlaw 450 S, Руководство пользователя, Страница: 25 / 218

Результаты поиска

Содержание 2008 Outlaw 450 S

Отзывы: