Polaris 2008 Outlaw 450 S Скачать руководство пользователя страница 131

Страница: 131 / 218

128

Maintenance

Lights

Headlight Adjustment

1. Position the vehicle on a level surface with the head-

light approximately 25 ft. (7.6 m) from a flat wall.

2. Measure the distance from the floor to the center of

the headlight and make a mark on the wall at the

same height.

3. Start the engine and turn the headlight switch to high

beam.

4. Observe the headlight aim on the wall. The most

intense part of the headlight beam should be aimed 2"

(5 cm) below the mark placed on the wall.

NOTE:

Include rider weight on the seat when measuring.

5. Loosen the pivot screw and adjust the beam to the desired position.
6. Tighten the screw and torque to 27 in. lbs. (3 Nm).

Pivot

Screw

Содержание 2008 Outlaw 450 S



























































































































































































































Результаты поиска

Содержание 2008 Outlaw 450 S

Отзывы:

Polaris 2008 Outlaw 450 S, Руководство пользователя, Страница: 131 / 218

Результаты поиска

Содержание 2008 Outlaw 450 S

Отзывы: