Polaris 2008 Outlaw 450 S Скачать руководство пользователя страница 129

Страница: 129 / 218

126

Maintenance

Carburetor Jetting

Carburetor re-jetting can be performed to compensate for altitude and/or temperature

changes. If the vehicle is to be operated at various altitudes and temperatures, certain adjust-

ments can be made to improve its operation and driveability. Above 6000 feet (1800 m) the

engine air/fuel mixture becomes overly rich. An engine loses approximately 3% of its power

for each 1000-foot (305 m) increase in elevation. Although this power cannot be regained,

changes to the carburetor and drive system can be made to allow more efficient operation.

NOTE:

Contact your dealer for altitude adjustments. Your dealer has the training and special tools

required to perform these modifications.

Содержание 2008 Outlaw 450 S



























































































































































































































Результаты поиска

Содержание 2008 Outlaw 450 S

Отзывы:

Polaris 2008 Outlaw 450 S, Руководство пользователя, Страница: 129 / 218

Результаты поиска

Содержание 2008 Outlaw 450 S

Отзывы: