Polaris 2008 Outlaw 450 S Скачать руководство пользователя страница 121

Страница: 121 / 218

118

Maintenance

Engine Cooling System

The engine coolant level is controlled or maintained by the recovery system. The recovery

system components are the recovery bottle, radiator filler neck, radiator pressure cap and

connecting hose.
To ensure that the coolant maintains its ability to protect the engine, we recommend that you

completely drain the cooling system every two years and add a fresh mixture of antifreeze

and water.
Polaris recommends the use of Polaris Premium 60/40 anti-freeze/coolant or a 50/50 mixture

of high quality aluminum compatible anti-freeze/coolant and distilled water. See page 186

for the part numbers of Polaris products.

NOTE:

Polaris Premium 60/40 is already premixed and ready to use. Do not dilute with water.

NOTE:

Always follow the manufacturer's mixing recommendations for the freeze protection required

in your area.

Содержание 2008 Outlaw 450 S



























































































































































































































Результаты поиска

Содержание 2008 Outlaw 450 S

Отзывы:

Polaris 2008 Outlaw 450 S, Руководство пользователя, Страница: 121 / 218

Результаты поиска

Содержание 2008 Outlaw 450 S

Отзывы: