Polaris 2000 Universal Snow страница 147 Скачать руководство пользователя

Страница: 147 / 154

142

ACCESSORIES

Accessories

There are a wide range of accessories available for Polaris snowmobiles. From Map Lights

to electric start, Polaris has the accessories that will make your ride even

more

pleasurable.

Contact your dealer for a list of accessories available for your machine.

NOTE:

Accessory tether switch available for all models - PN 2870668.

WARNING:

You must only use Polaris parts and accessories on your 2000 Polaris snowmo-

bile. Use of non-Polaris approved parts and accessories may result in the following:

Non-compliance with requirements

Voiding warranty

Personal injury to yourself or others

This applies but is not limited to the following areas: Brakes, clutches, fuel systems, and

exhaust systems.

NOTE:

Exhaust systems are critical safety areas and must use approved Polaris parts.

Please see your Polaris dealer for service.

Maintenance Items

Battery Tender

2871076

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Gas Dock

2871254

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Nylon Starter Rope (100’ spool)

2870621

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Recoil Starter Handle

2870500

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fuel Filters (Pkg of 2)

2870622

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Drive Belt Holders (Pkg of 2)

2870502

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tool Pouch

2870527

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tool Kit

2870463

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Carbon Clean

2871326

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pump for Chaincase Oil Gallon

2870465

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chaincase Oil - Gallon

2870464

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chaincase Oil - 16 oz.

2871280

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Brake Fluid DOT 3, 12 oz.

2870990

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Clutch Lube 4 oz.

2870510

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Grease, Premium All Season

2871066

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Anti-Corrosive Lubricant/Electrical Connector Lubricant

2871329

. . . . . . . . . . . . . . . . . . . . . .

Fuel Deicer, Isopropyl

2870505

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fuel Stabilizer, 16 oz.

2870652

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fogging Oil

2870791

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

T-9 Metal Protectant

2871064

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Metal Polish

2870632

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Grease Gun Kit (All Season) 3 oz.

2871312

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Refill Grease Cartridge (All Season) 3 oz.

2871322

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Paint Codes

Paint codes are found in your Owner’s Manual Supplement. Paints can be ordered direct from

Midwest Industrial Coatings (612-934-8252). Mix as directed.

Содержание 2000 Universal Snow



























































































































































Результаты поиска

Содержание 2000 Universal Snow

Отзывы:

Похожие инструкции для 2000 Universal Snow

Бренды по названию

Популярные бренды

Polaris 2000 Universal Snow, Инструкция по безопасности и обслуживанию владельца

Результаты поиска

Содержание 2000 Universal Snow

Отзывы:

Похожие инструкции для 2000 Universal Snow

Бренды по названию

Популярные бренды