PNI Hunting 3C / 300C, Руководство пользователя

Страница: 28 / 86

28
Power consumption
IR LEDs Off Photo: 120mA; Video: 110mA
IR LEDs On
Wide lens Photo
Max.Range: 850mA
Balanced: 1050mA
Min.Blur: 1250mA
Video: 670mA
Interface TV out/USB/SD Card/DC Port
Operating temperature -30°C to 60°C
Waterproof Specifications IP54
dimensions 131.42 x98.72 x77.44mm
Weight 404g
APP IOS & Android
TROUBLESHOOTING
Photos Do Not Capture Subject of Interest
1. Check the “Sensor Level” (PIR sensitivity) parameter setting. For warm environmental conditions, set the Sensor Level
to “High” and for cold weather use, set the sensor for “Low”.
2. Try to set your camera up in an area where no heat resources are in the camera’s field of view.
3. In some cases, set the camera near water will make the camera take images with no subject in them. Try to aim the
camera over ground.
4. Try to set camera on stable and immovable objects, i.e.: large trees.
5. At night, motion detector may detect beyond range of the IR illumination. Reduce distance setting by adjusting sensor
sensitivity.
6. Rising sun or sunset can trigger sensor. Camera must be reoriented.
7. If person/animal moves quickly, it may move out of the camera’s field of view before photo is taken. Move camera
further back or redirect camera.
Camera stops taking images or won’t take images
1. Please make sure that the SD card is not full. If the card is full, camera will stop taking images. Or user can turn on
Cycle Recording to avoid such problem.
2. Check batteries to make sure that alkaline, or NiMH AA batteries left power is enough for camera to work.
3. Make sure that the camera power switch is in the “On” position and not in the “Off” or “Setup” modes.
4. When GPRS function is on, there will be around 1 minute interval for camera to send out photo before camera shooting
the next photo. Turn off the GPRS, camera can shoot photos continuously.
5. Please format the SD card with camera before using or when camera stops taking images
Night vision flash range doesn’t meet expectation
1. 4pcs AA batteries is not able to support camera night vision ability; please install 8 pcs AA batteries;
2. Please check to make sure that batteries are fully charged or left power is enough;
3. “Max Range” offers better IR flash range. Given IR flash range values are based on Max Range setting; so please
adjust Night Mode to Max Range for better night vision flash range;
4. High-quality 1.5V NiMH rechargeable AA batteries can also offer much better IR flash range; alkaline batteries cannot
deliver enough amperage to power the illuminator consistently at night;
5. To ensure accuracy and quality of night time image, please mount camera to dark environment without any obvious
light sources;
6. A certain surroundings (like trees, walls, ground, etc.) within flash range can get you better night time images; please
do not aim camera to total open field where there is nothing within IR flash range to reflect flash back; it’s like shinning
a flashlight into sky in night, you just can’t see anything; same does camera;
Camera does not send photos via email
1. Check the SIM card in a phone for: running and presence of active Internet / mobile data, PIN removed;
2. Check the card’s GPRS internet settings; If the network logon error message appears, manually complete these
settings according to the manual and the settings received from the GSM operator;
3. Check whether In sender’s mail settings if Default mode is enabled (with camera automatic send server); If you want
manual settings with a personal account, check if these settings are correct with your mail provider, and if you removed
all the security restrictions in your mail account.
4. Check that the “Send To” mail addresses are written correctly, without spaces before or after; Check and delete the
phone numbers in the same menu, if available.