PNI Hunting 3C / 300C, Руководство пользователя

Страница: 26 / 86

26
1. Camera will check if inserted SIM card is activated during signal search in “Test” mode;
2. If SIM is not activated, “Pls input PIN-Code” will pop up on screen after signal search;
3. Then “SIM PIN” will turn to be configurable in “3G” page of Menu;
4. Enter PIN code in “SIM PIN” and save to exit; when you restart the camera after you enter the PIN code, camera
will activate SIM card automatically during signal search;
Note:
• “Pls input PIN-Code” will pop up again if wrong PIN code is entered;
• Pls re-try your PIN code as if you see “Pls input PIN-Code” after signal search;
• SIM is normally limited to be activated 3 times; it’ll be locked if PIN code entered are all wrong during these 3 times
trial. So we suggest you to double confirm your PIN code before you try again.
• Pls insert SIM card into your phone to unlock it by using its PUK code after 3 times trial of activation based on
steps above.
SMTP/ FTP Pic Size
Pictures sent via SMTP and FTP are in optional size as 640*480, or 1920*1440
Notes:
1. camera will only send photos to preset phone numbers via MMS;
2. camera will only send photos to preset email(s) via MMS if SMTP is not configured;
3. camera will only send photos to preset email accounts via SMTP (GPRS) if SMTP is set
Max Num/Day
Default: unlimited;
Optional: 1~99
Eg: user chooses 50, then cameras will only send 50 pics every day. All the rest photos will only be stored in SD card.
SMS Ctrl
1) By Trigger: (Suggest for AA battery power)
Camera will only be able to change & save setups remotely when camera is triggered to shoot photos/ videos.
2) All the Time: (Suggest using when Power adapter connected as this option will consume huge battery power)
Camera GPRS module stand-by all the time; so camera setups can be changed and saved whenever you sent the
remote SMS setup commands.
Daily Report
1) OFF;
2) ON; Choose ON to enter to set up a time when you want camera to send you the Daily Report
NOTE: When this option is enabled, the camera will no longer send pictures via e-mail. The only remaining active
position is sending this report.
What’s in the daily report: Device IMEI Number, CSQ (Signal Strength): 0 ~ 31, Camera ID, Temperature, Date & Time,
Battery Left Volume, SD Card Info, Pics Taken by Cam, Pics Sent by Cam (Total pictures sent by camera).
• Other
Language English…
Date/Time
Month : date : year; hour : minute : second
Note: Pls adjust camera date/time to ensure some functions work as expected.
Stamp Imprints of programmed camera ID, moon phase, temperature, date, and time on photo
Battery Type
Alkaline/ NI-MH
Choose correct battery type of used batteries in camera makes camera perform better.