Pneusej Venga 400, Руководство по эксплуатации

Страница: 32 / 62

- securing support legs in transport position
- locking against opening the machine
- functionality of lighting
- closing the quick-releasing opening
Field preparation
Filling the seed hopper
Use ladders or stairs to enter the platform. Platform is designed only to watch
filling.
Close the emptying hole on the hopper and emptying hole on the dosing unit.
➢
Fill the hopper as it is written in:
→
Preparation for seeding – Seed filling
After filling the hopper
On the top of the hopper, there is a cover sheet against wind and rain. While seeding,
hopper should be covered with this sheet.
Straight the main frame parallel to the ground (horizontally on flat surface).
Setting seeding depth
Seeding depth is set with pressing wheel on sowing pad.
Deep guidance ensures better plant emergence. Seed placing is the same at higher speeds.
➢
Prepare seeding machine to working position.
➢
Lock-off and pull the fuse from the pin on the wheel holder.
➢
Set desired depth by moving the pin to selected hole.
➢
Secure pin.