MODEL NO.: HBS
– 20
FEATURES
Forged alloy steel used for cylinder & cylinder body
Single return spring design
Special quality sealing for specified pressure
Easy to operate & maintain
Light weight & compact design
Unique design of jaw and punch, special steel used for longer life
Wide range of Power Pack used for user requirement
Single piece ram & piston design for easy maintenance
Suitable tool hanger fitted to positioning the tool at any angle for easy to operate
SPECIFICATIONS
Capacity:
Ø5.0-20.0mm
Hydraulic Power Pack
:
Equipped with Solenoid Controlled D.C. Valve
Trolley Mounted & Top Cover Fitted
Pump
:
Radial piston pump
Power Supply Details :
440 and 220 V
Solenoid Controlled D.C. Valve : Controlled by push button type hand switch fitted in the handle
Tool Weight:
10.0 Kgs / 22.0 lb
OPERATIONAL MANUAL
1.
Check the hose and control cable connectors match with that of the Bar Straightner.
2.
Attach the hydraulic hose from the power pack to the machine properly so that there can be no leaking of hydraulic fluid.
3.
Connect the control cable from the power pack solenoid valve to the Bar Straightner.
4.
Connect the power cable of the power pack to a suitable wall power outlet and switch on the power pack,
do not press
the switch on the handle of the Bar Straightner right now.
5.
Let the power pack idle (oil flowing from pump to tank) for a couple of minutes.
6.
Now place the rod to be straighten between the jaw & punch.
7.
This is to ensure that the
full diameter of the job is within the width of the jaw & punch.
8.
Hold the job with a gloved hand. Press the trigger & straightning operation start.
9.
Switch off the power pack and disconnect the power pack from the wall out-let after you finish.
MAINTENANCE
