pmv
mounts
.co.uk
Mounting instructions for Mersive Solstice Pod holster
Direct mount / behind wall mounted screen
Model No.
PMVMERSPG3
Factory No.
PMVMERSPG3
Included in the box
Holster with locking lid and
security fixing (Assembled)
Barrell lock with
steel sleeve.
Mounting arms / extenders X2
Mounting with VESA display mount
1.1 Remove security fixing and locking lid before mounting holster.
1.2 Using suitable fixings, secure holster to wall / desk / fixed surface.
1.3 Install Mersive Pod in to the holster as per notes on Page1.
1.1 Remove security fixing and locking lid before mounting holster.
1.2 Using the correct fixings, secure holster to VESA pattern of the display.
(Only two fixing points may be available, this will be secure enough)
1.3 Install Mersive Pod in to the holster as per notes on Page1.
The x2 mounting-arms can be used to mount the holster in a number of different ways behind a display;
Either side of the VESA pattern, above or below the VESA pattern or inside the VESA pattern if there is
useable space and depth.
1
1
Wall / Desk Mounting
Direct to PC Monitor / Small Screen
Holster can fix directly to 75mm + 100mm VESA patterns.
Mounting arms can extend horizontally from 75mm VESA patterns.
Mounting arms can be mounted to meet 200mm, 300mm + 400mm VESA patterns
Designed & Manufactured
in the United Kingdom
Read these instructions carefully before assembling this equipment.
Check the equipment has been supplied with all parts and fixtures prior to assembly.
Assemble in a suitable location.
Two people will be required for assembly and three persons for installation of the screen on to the equipment.
Do not attempt to alter or modify any part of the equipment or its attachments.
Do not use if any parts are broken or appear to be damaged.
Tighten all bolts and fixings securely with appropriately sized tools.
Only use fixings provided with this bracket.
Do not position the equipment close to sources of heat or moisture.
C - M8 Washer
D - Security Allen Key X1
X4
B - M4 Flange Nut X4
Kit checklist
(Security fixing - Assembled)
A - M5 x 10mm X1
75mm
75mm
75mm
100mm
135.50mm
75mm
400mm
400mm
300mm
300mm
200mm
200mm
Unlocking / Locking the h Installing the Mersive Pod.
*Mount holster before installing and securing Solstice Pod*
1. As packed, remove
security fixing and lid.
2. Slide in Solstice Pod
3. Position lid and fasten with security fixing.
4. Insert and lock barrell lock.
Insert Pod as shown
See notes above for hole
centres and dimensions.
Power cable, USB, Network end to the bottom of the holster.
The Holster can be mounted upside down if this improves access for your install.
