GETTING STARTED
Remove all components from the package. Items in the pack include:
AAA Bluetooth headset with Ear Hook, Ear Cap, User Guide. Please
check the contents carefully and contact your local dealer
immediately if there are any shortages.
GETTING TO KNOW YOUR HEADSET
Please note some models of headset will differ slightly in style and
the functionality may vary according to their specifications.
INSERT THE AAA BATTERY INTO YOUR HEADSET
The headset is powered by one AAA battery. Please insert an AAA
battery before use. A new AAA battery will provide up to 20 hours of
talk time and up to 30 days of standby time.
Please note the talk time and standby time figures are best
estimates only. Quoted figures will vary depending on usage
patterns, connecting device (including mobile phone) and AAA
battery specifications. We recommend using a high capacity
AAA battery (alkaline, rechargeable NiMH or Lithium) for
optimum performance. Rechargeable NiMH and lithium
batteries may provide the lowest long term cost, despite higher
initial costs.
To insert AAA battery
1. Unlock the battery chamber cover
by sliding the lock towards the
Volume DOWN ‘–‘ button.
2. Open the battery chamber by
sliding off the cover away from the
ear piece in the direction of the
arrow.
3. Insert the AAA battery making
sure the Positive (+) end is facing
out of the chamber and hence
touching the battery cover.
4. Use the battery cover to push the battery down and slide the
battery chamber cover back into place and lock.
PAIR THE HEADSET TO YOUR MOBILE PHONE
Pairing is the process of linking the headset with your Bluetooth
mobile phone. Before you use the AAA headset with your mobile
phone you must pair them. After this process is complete, you can
use the headset only with its paired mobile phone. If you wish to use
the headset with a different mobile phone, you must repeat the
pairing process with the new mobile phone. In this case, the headset
will no longer work with the original mobile phone.
Please refer to the user manual of your mobile phone for
further information on ‘How to Pair’. Typically, you need to
make your phone ‘Discover’ the headset by using a
“Bluetooth”, “Connect” or “Setup” menu then selecting an
option to “Discover” other Bluetooth devices.
To pair the devices
1. Before you pair the headset, ensure that the battery is fully
charged or that you are using a new alkaline battery.
2. Set up your mobile phone to “Discover” your headset.
3. With the headset turned off, press and hold the Talk button for
about 7 seconds until the blue and amber LEDs flash
alternately or until you will hear the “PAIR” tone (the second of
two tones).
4. Release the Talk button. The headset is now in “Pairing”
Mode.
5. Initiate the device discovery feature on the mobile phone.
Refer to the mobile phone user guide for instructions on
initiating this feature.
6. When prompted by the mobile phone, enter the headset
passkey or PIN code
0000
. When pairing is complete, the Blue
LED on headset will flash at three second intervals and the
headset will be placed in standby mode, ready to make and
receive calls.
If disconnection or a lost link occurs, it may be due to the
following reasons:
a) The range is over 3 metres between the headset and the
mobile phone.
b) Mobile phone disconnected the link to conserve power or
enable other functions.
c) Either device has been switched off.
Note: The headset, in normal operation, should maintain the
connection with the mobile phone at all times once pairing has
been successful and a connection has been established between
the two devices.
To cancel pairing mode
While the headset is in pairing mode,
you can cancel the pairing process and turn off the headset.
Press and hold the Talk button for approx 3 seconds. You will
hear an “OFF” tone (two descending “beeps”) and the Blue LED
will flash quickly several times. Release the Talk button.
FITTING THE HEADSET ON YOUR EAR
The AAA Headset is designed to fit comfortably in your ear. The
ear hook can be fixed into the headset from both sides, allowing
you to position on right or left ear. The ear hook can be separated
from the Headset by simply pulling the base of the hook away
from the main body of the Headset. The ear hook can then be
reinserted in the other direction for positioning on the opposite
ear. The ear hook is flexible and can be bent to adjust the fit that
is best for the individual user.
AAA
BLUETOOTH HEADSET
P/N NAAAH2C2XXX
USER GUIDE
Declaration of Conformity
.
We declare that product NAAAH2C2XXX conforms to
the R&TTE Directive 1999/5/EC .
Battery chamber
cover
Talk button
Volume up +
LED
Volume down
Microphone
Battery
cover
lock
Ear
Hook