PMI SVM-10, Руководство пользователя

Страница: 14 / 42

SVM-10 Manual
1.2.2 Inputs
Direct hookups are fed into 4 voltage, 0-10vac inputs. Four direct inputs are available to
be recorded and used with reports and strip charts. To record an input, the input must be
selected as a strip chart in WinScan™.
1.2.3 Instrument Size
The Scanner is contained in a standard 6.5 inch (165.1mm) wide x 6.5 inch (165.1mm)
high x 4.25 inch (107.95mm) deep NEMA 4x lockable case.
1.2.4 System Description
The Scanner is a system designed to measure and record AC Voltage parameters using
state of the art digital technology. Signal inputs from AC power connections are
monitored by the system. No pen, ink or paper are required; a graphics display shows
the information. The unit can also be used with PalmView software running on a
Palm® Personal Digital Assistant (PDA) for real time viewing of waveforms, harmonic
bar graphs, vectors, as well as numeric values.
A. Screens and Displays
Screen display styles are available to present data in a familiar format. User instruction
and data entry screens feature easy to use menus, with easy to understand terms.
Operating display screens show information in a logical and easy-to-read format.
B. Day-To-Day Use
Day-to-day operating measurements are stored and recalled instantly. Up to two MB of
standard internal memory allows data to be efficiently and economically stored and
retrieved.
C. Configuration
WinScan™ software allows the user to program the unit quickly and efficiently using an
IBM Windows based compatible PC.
Programming can also be done using PalmScan Software running on a Palm® PDA.
It’s graphical touch screen interface provides straight forward,
user friendly configuration. Strip charts, and Event parameters can be easily
programmed. Other parameters such as Scales, and engineering units are also easy to
program.