SOLUTIONS & KITS
KITS
PMIROPE.COM 1-800-282-ROPE
T
For more information about this or other
PMI products, please contact us at:
PIGEON MOUNTAIN INDUSTRIES
PO Box 803
LaFayette, GA 30728, USA
706-764-1437
1-800-282-ROPE (7673)
PMIROPE.COM
PMI LIMITED WARRANTY
PMI products are warranted to the original retail purchaser to be free
from defect in material and workmanship for a period of one year. PMI
will repair or replace the item without charge provided inspection at our
factory discloses no misuse or alteration, which, in our judgment, has
affected the condition or functioning of the product. All implied warranties
imposed by law in connection with the sale of PMI products are also limited
in duration to a period of one year. PMI expressly excludes and shall not
be liable for any consequential damages arising out of any breach of the
express or implied warranties on sales of PMI products. Because of the
high risks involved in high angle rope work such as, but not limited to,
rescue, rope access, caving, rappelling, rock climbing and mountaineering,
no further warranties exist or are implied by PMI. Regulations issued under
the Magnuson-Moss Warranty Act require us to include the following
statement: some states do not allow limitations on how long an implied
warranty lasts nor the excluding or limitation of incidental or consequential
damages, so the above limitations may not apply to you.
•
YOU COULD BE KILLED OR SERIOUSLY INJURED IF YOU
DO NOT READ AND UNDERSTAND THIS BOOKLET BEFORE
USING PRODUCT.
•
SPECIAL TRAINING AND KNOWLEDGE ARE REQUIRED TO
USE THIS PRODUCT.
•
YOU MUST THOROUGHLY READ AND UNDERSTAND ALL
MANUFACTURERS’ INSTRUCTIONS BEFORE USE.
•
USE AND INSPECT THIS PRODUCT ONLY IN ACCORDANCE
WITH THE MANUFACTURERS’ INSTRUCTIONS.
•
YOU CAN CONTACT PMI AT 706-764-1437 FOR
IMPORTANT SAFETY INFORMATION.
PMI
®
/ SMC
ADVANCE TECH
HAUL SYSTEM
WARNING
KT36158
ABOUT YOUR PERSONAL SAFETY
Your personal safety is just that...... personal. You are responsible for
your own safety. We build the best possible products for the purposes
stated, but it is up to you to be responsible for applying these, and
other products, safely.
Your personal safety is influenced by the decisions you make. Take
the time to read and understand these instructions, and get the
instruction you need for your application. The high angle environment
is a potentially dangerous one. We hope you take it as seriously as we
do. The included pull cord for releasing the capture cam on the pulley is
NOT a life safety rope and should never be used to support a life safety
load.
Proper training, good equipment and a personal commitment to safety
will lessen the danger of rope work. However, take care not to become
complacent. Inspect your equipment, rigging, anchors and that of
others around you for safety at all times when you are in the vertical
environment.
Activities involving the use of the life safety rope are inherently
dangerous. Such activities include, but are not limited to, ascending
and descending fixed lines, hauling, highlines, positioning, and belaying.
Special knowledge and training are required to use this product.
Read this brochure entirely. If a copy was not provided with your rope,
or you have lost yours, contact PMI for a free copy.
You are responsible for your own actions and decisions; if you do not
accept this responsibility, do not use this product.
You must thoroughly read and understand all manufacturers
instructions before use.
Use and inspect this rope only in accordance with the manufacturers
instructions provided here.
Save these instructions.
Your new haul system has been assembled from the finest components
to give you years of dependable service. The compact form factor
provides an extremely strong and versatile haul system for about three
pounds. This pre-rigged system gives either a 5:1 or 4:1 mechanical
advantage with no rigging required. Just flip the system end to end to
set up for either mechanical advantage as needed. A big advantage of
this haul system is the incorporation of the SMC Advance Tech line of
pulleys which provide a built-in progress capture system
that can be reset with an included lanyard. The capture cam can also
be parked to allow the system to run freely. Your new system also
comes with PMI 9mm static rope and SMC locking steel carabiners.
SKU:
KT36158
USA Made | Berry Compliant
THIS SYSTEM INCLUDES:
A.
(1) SMC Advance Tech HX progress capture pulley
B.
(1) SMC Advance Tech Mate pulley
C.
(2) SMC Lite Steel locking carabiners
D.
(10) meters of PMI® 9 mm EZ-bend rope
E.
(3) meters of 3 mm PMI utility cord
F.
(1) 5 mm Maillon Rapide oval screw link
G.
(1) compact storage bag (red)
WARNINGS
INTRODUCTION
CERTIFICATIONS
CONTENTS
A
B
C
C
D
E
G
F
WARNING
WARNING
WARNING
