The PMI® Pick Off Strap is a must have piece of equipment with multiple
uses for rescue and other work at height. This PMI® Pick Off Strap is made
of a heavier nylon than the PMI® Easy Pick Off Strap, which provides for
a higher minimum breaking strength. It also has a hot forged alloy steel/
cadmium plated D-Ring and V-Ring attachment points for a solid metal on
metal-on-metal connection. It is designed to facilitate the rescuer tethering to
a subject and transferring the subject’s weight onto their system. In addition
to its foundational application for technical rescue, this highly versatile strap
has a wide range of functional uses for practitioners involved in rope access,
work at height, outdoor adventure programs, search and rescue and more.
The PMI
®
Pick Off Strap is designed with many versatile features, as shown
in
Diagram A
.
Color:
Black
MBS:
20 kN (4496 lbf)
Weight:
11.0 oz (312 g)
ADJUSTABLE Length:
8” to 50” (20cm to 127cm)
Material:
Nylon webbing, nylon stitching, hot forged alloy steel/cadmium
plated V-Ring and D-Ring attachment points.
MADE IN THE USA
WARNING!
ABOUT YOUR PERSONAL SAFETY
•You are responsible for your own safety and decisions while using this
product.
•Special training and knowledge are required to use this product. This strap
is intended for use by those who are trained and experienced in technical
rope rigging and rescue applications.
•Before using this product you must thoroughly read and understand these
Manufacturer’s Instructions, as well as all warnings, product labels and
associated information.
•Activities involving the use of this product are inherently dangerous; you
must understand and accept the risks involved.
•Failure to follow these stated warnings may result in serious injury or death.
•Keep these Manufacturer’s Instructions, all product labels and the
Equipment Inspection Log WITH the equipment so that any potential user
can read them prior to use and make entries after use.
•Please contact PMI at 706-764-1437 to answer any additional questions
regarding safety and use of this equipment.
WARNING!
PMI is not responsible or liable in any way for damages of any kind, injury
or death resulting from direct or indirect incidents related to the use of its
products.
WARNING!
The entire life safety anchor system including the anchor points, ropes,
webbing, carabiners and other equipment in the system must be of sufficient
strength to safely hold the maximum weight of the intended transferred load.
WARNING!
Check to be sure that this product is compatible with the other
components of your system before use.
WARNING!
Avoid possible abrasion that can happen when straps come
into
contact with hard, sharp or rough surfaces.
PRODUCT DESCRIPTION
FEATURES
CERTIFICATIONS
SPECIFICATIONS
WARNINGS
WEBBING AND CORDAGE
SEWN
WEBBING
RM00396
PMIROPE.COM 1-800-282-ROPE
T
For more information about this or other
PMI products, please contact us at:
PIGEON MOUNTAIN INDUSTRIES
PO Box 803
LaFayette, GA 30728, USA
706-764-1437
1-800-282-ROPE (7673)
[email protected]
PMIROPE.COM
PMI
®
PICK OFF
STRAP
SG51032
Manufacturer’s Instructions
EQUIPMENT INSPECTION LOG
Date
Use/Maintenance
Comments
Name
Item
Model#
Date of Manufacture
Date in service
Size
Lot/Serial#
•
Adjustable V-Ring
attachment point
provides a strong easy
clip-in area and has a
sliding bar to capture the
progress when hauling the
load end.
DIAGRAM A
•
Hand Strap for pulling
on the haul load.
•
Lightweight design.
•
Adjustable length: 8”
to 50”.
•
Hook and loop keeper to hold
the tail neat and compact
until ready to use.
•
D-Ring that
provides a
strong and
easy clip-in
point.
V3-0714
