manualshive.com logo in svg

PMD MC73110, Руководство пользователя

Поделиться
Скачать
PMD MC73110 Скачать руководство пользователя страница 13

MC73110 Developer’s Kit Manual

13

Installation

2

2.4 Installation Sequence

For a normal installation of  a MC73110 Developer’s Kit card, you will need to configure your card for the
connection configuration you will be using (internal or remote). Configuration of  the MC73110 Developer’s Kit
card is described in detail in 

section 2.6, Preparing the Card for Installation, see page 14

.

Next you will need to connect your system’s motors, encoders, amplifiers, and sensors as desired to operate your
motion hardware. A description of  the connections that are made for the MC73110 Developer’s Kit card is found
in 

section 2.7, Connecting to the Card, see page 15.

Once this hardware configuration is complete, you should then install the software. Installation of the software is
described in 

section 2.9, Software Installation, see page 19

.

The final step to finish the installation is to perform a functional test of the finished system. This is described in

section 2.10, First Time System Verification, see page 19

.

Once all of the above has been accomplished installation is complete, and you are ready to operate the card.

2.5 Required Hardware

To operate the MC73110 Developer’s Kit card with Pro-Motion, the Windows-based exerciser program, you will
need the following hardware:

1

The recommended platform is an Intel (or compatible) processor, Pentium or better, 5 MB of
available disk space, 32MB of available RAM, and a CDROM drive. The PC operating system
required is Windows 9X/ME/NT/2000/XP.

2

A 3-phase Brushless DC Motor with Hall sensors and optional quadrature encoder feedback
with index.

3

Cables as required to connect to the MC73110 Developer’s Kit card to your motor, to your
encoder, to the card power input, to the analog or digital command signals. In addition you
will connect the PC to the card via an included DB-9 cable. For complete descriptions of these
connections see 

section 2.7, Connecting to the Card,  page 15.

Содержание MC73110









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды