Plymovent VSRX, Руководство пользователя

Страница: 16 / 24

7
6
4.9 Assemble and Hang the Hose and Grabber
1. Upper Hose
2. Metal Saddle
3. Balancer
4. Mid Hose
5. Lower Hose Assembly (Safety Disconnect Handle)
6. End Plate
Follow these steps to assemble and align the exhaust hose
assembly:
a. Mount the upper hose (1) to the trolley using a hose clamp.
b. Attach the upper hose to the short side (from the tab) of the
metal saddle (2). You may need to twist the hose to to have
the u-bend or loop positioned away from the vehicle in the 3
o’clock position if looking down at the crab trolley, with the
balancer at the 12 o’clock position.
c. Install the balancer (3) using the caribiner hook and safety
cable (8), and attach the Balancer Locking Cable (BLC) to the
trolley (9). Assemble the BLC using the length listed in the
Installation Table on page 10. Ideally, 6 in. (15 cm) of the
Balancer cable should be exposed when the Grabber nozzle is
connected to the vehicle.
Install the BLC so that it is on the back side of the balancer
and away from the adjustment locking clip. This will keep the
BLC from coming into contact and potentially breaking the
locking clip. The balancer snap hook should be oriented with
the catch or door of the hook on the same side of the balancer
as the locking clip. This will ensure that the BLC does not open
the snap hook, allowing the BLC to come loose. The BLC
attachment to the metal saddle snap hook should be opposite
of the catch or door so that it does not open it.
d. Attach the mid hose (4) to the long side of the metal saddle
with the supplied hose clamp. The mid hose is directional, so
install with directional arrow pointing up or with the airflow.
e. With the balancer holding the hose all the way up cut the mid
hose at approx 4 ft (1,2 m) from the floor and attach to the
Safety Disconnect Handle (5) with the supplied hose clamp.
f. The height of the Grabber nozzle should be in. 14 to 18 in.
(35,5 to 45,7 cm) from the finished floor (7).
g. Secure the back end cap using the holes previously drilled (6).
3
1
2
4
5
9
8
MAN_MAG_VSRX_290518_LETTER_EN
Page 16 of 24
WARNING
PRODUCT MAY CONTAIN SHARP EDGES
Use care when servicing unit. Failure to do so could
result in minor personal injury.