Plymovent CONTROLGO, Инструкция по установке и эксплуатации

Страница: 4 / 25

0000112607/010420/A ControlGo 3
1.4 Options and accessories
The following products can be obtained as an option and/or
accessory:
- LightTower
- PT-2500 | External pressure sensor
4
1.5 Technical specifications
1.5.1 ControlGo/Panel
Dimensions refer to Fig. I on page 17
Weight 11 kg (24 lbs.)
Material of housing sheet metal
Protection class IP 65
Input voltage 100-240 VAC, 50-60Hz
Internal operating
voltage
24 VDC
Power consumption max. 60 W
Inputs 5x digital input (10 mA wetting current)
1x analogue input (4-20 mA)
Outputs 2x relay output (max. 30 VDC, 2,5 A)
2x output “low side switch” (24 VDC, 2,5 A)
1x output “low side switch” (24 VDC, 250 mA)
4x output “low side switch” (24 VDC, 30 mA)
Internal connectors 1x CAN + power (Control/SlaveBoard)
1x USB 2.0 (host only, USB A receptacle)
1x ethernet (for service purposes)
1x RS-232 (for service purposes)
Internal pressure
sensors
1x integrated pressure sensor
Working range: 0-4000 Pa (0-16 in. WG)
Guidelines &
standards
EMC 2014/30 EU LVD 2014/35 EU
EN 61000-6-2 IEC 60204-1
EN 61000-6-4 IEC 61131-2
IEC 61439-1
Approvals &
certificates
CE
cULus (UL 508A)
1.5.2 Control/SlaveBoard
Operating voltage 24 VDC (+/- 15%)
Current max. 2,5 A
Internal connectors 2x CAN + power (max. 24 VDC, 2,5A)
Guidelines &
standards
EMC 2014/30 EU LVD 2014/35 EU
EN 61000-6-2 IEC 60204-1
EN 61000-6-4
Approvals &
certificates
CE
1.6 Ambient conditions
1.6.1 ControlGo/Panel
Pressure sensors:
Ambient temperature: internal external
- min.
- nom.
- max.
0°C (32°F)
+20°C (68°F)
+50°C (122°F)
-20°C (-4°F)
+20°C (68°F)
+50°C (122°F)
Max. relative humidity 80%
Suitable for outdoor use yes
1.6.2 Control/SlaveBoard
The ambient conditions of the MDB or SCS filter system apply.
4. For the filter pressure
2 PRODUCT DESCRIPTION
2.1 Components
The product consists of the following main components and
elements:
2.1.1 ControlGo/Panel
Fig. 2.1
A Housing
B Control panel
C PC board (master board)
D Tumbler switch 0-1 | Service Mode
E Main switch
F Power supply
G Bottom plate with cable glands
Fig. 2.1
A B C
E F
G
D
Main components Panel
2.1.2 Control/SlaveBoard
Fig. 2.2
A Box
B PC board (slave board)
Fig. 2.2
A B
Main components SlaveBoard
2.1.3 Connection cables
Cables to connect the Panel to the SlaveBoard(s).
2.2 Operation
ControlGo is an intelligent platform that controls a filter
system MDB or SCS and the connected extraction fan. It
monitors the availability of compressed air and arranges the
filter cleaning system.
You can operate the system in two ways:
- manually by the push buttons on the control panel
- automatically by signals from an external device
Fig. 1.1 and Fig. 1.2 show the connection of the components
of ControlGo with the filter system and extraction fan.
2.2.1 Automatic progressive filter cleaning
The filter cartridges of the connected filter system are cleaned
from the inside out by compressed air pulses. To optimize the